Posts Tagged 'liquids'

Animation in PowerPoint – Process Flows

My posts on animating liquids and creating various “flows” have been pretty popular. One reader shared a project involving animating a chemical “process flow” that seemed a good application for some of these techniques. Inspired by her project, I have created my own version.

However, I don’t know much about this subject matter (surprise) and may have made mistakes. Please don’t judge the animations on technical accuracy. My purpose is only to demonstrate animations that may be useful in describing these processes or using them metaphorically to describe other kinds of processes.

I don’t think I would use these techniques for a technical audience. I do suggest that they may be useful for education, training or marketing.

Here’s the animation:

The process involves six steps:

  1. Quantities of two liquids (yellow and blue) are drained into two holding tanks.
  2. The contents of the two tanks are pumped into a larger vessel.
  3. The contents of the larger vessel are agitated resulting in a reaction indicated by a color change (dark green).
  4. The resulting liquid is pumped into vessel containing a filter.
  5. A vacuum pump draws the liquid through the filter, leaving unwanted material (black) behind.
  6. The filtered liquid (bright green) is drained into a tank.

This example demonstrates some of the techniques used in this project; the animated parts are outlined in red and labeled:

Here’s the annotated animation pane for this example:

Note: I use Stretch and Collapse in this project to avoid the soft edge Wipe; this works because I use rectangular tanks and pipes and thus can use uniformly filled Rectangles for the liquid elements. See this post for more on this subject.

The first effect applies a Collapse/To Bottom to the portion of the supply tank to be drained (“D” in the figure). Starting at the same time, the first “slug” of liquid (S1) Stretches/To Bottom, followed by the second slug (S2).  When S2 reaches the bottom of the tank, the fill portion (F) begins to Stretch/From Bottom.

When the Collapse of D ends (the draining is stopped), S1 begins to Collapse. The Stretch of F and the Collapse of S1 end simultaneously. The disappearance of S2 is for housekeeping purposes; it is not visible at the end of the animation.

This is easier than it appears – the order of events is logical. The timing is a matter of trial and error taking into account the relative sizes (volume) of the elements.

Here’s an example with a valve:

Here’s how the valve is drawn:

The handle is a Flowchart/Collate symbol (does anyone actually use these any more?). A Basic Swivel effect is used to turn the handle with a Stretch of the gate. Here’s an annotated Animation Pane for the example:

The animation is the same as before with the addition of the valve animations and a static slug just above the valve.

Here’s an example with a pump:

The impeller is a series of Arcs arranged around a circle; I used a couple of equilateral Hexagons (blue) to help align the Arcs:

Here’s the annotated Animation Pane:

Here’s the mixing step:

The paddle (P) is made from two Teardrop shapes; here’s the animation pane:

The filling process is as before. After the fill, the paddle (P) swivels while a dark rectangle Dissolves In representing the reaction and its product.

The Appear of the paddle is necessary because I used the Basic Swivel  Exit effect.

Here’s the filter step and the animation pane:

 

This animation is basically a number of things happening simultaneously: the vacuum pump rotor spins, the liquid level in the top part of the tank drops, individual drops (Ovals) fall (repeated motion paths) from the filter, the residue builds up on top of the filter and the liquid level rises in the bottom.  The Ovals are behind the filter object in the animation; the motion paths are staggered slightly to improve the appearance of the animation.

Here are some additional notes:

  • I assembled the animation using six separate slides – I do this often to simplify the construction of complex animations.
  • The static “infrastructure” elements (pipes, tanks, etc) are grouped together and appear on each slide – this also simplifies the animation.
  • Try other effects: bubbles, heating, cooling, explosions (!), meters, etc.
  • You may want to try other shapes to create more realistic elements or standard engineering symbols. This will require that you use the soft-edge wipe or other techniques to animate the liquids rather than the Stretch/Collapse effects that I used in my project. This shows what I’m getting at:
  • The first “draining” animation uses the Wipe effect; since PowerPoint 2007 this effect has a soft edge which may not be desirable in this project (see this post for more details on this). The second animation shows why Stretch/Collapse won’t work. The last two examples show how a Background-filled Rectangle (white) can be used as a “mask” produce the desired effect (the mask is between the tank outline and the shape representing the liquid).
  • You may want to use more realistic piping; here’s a technique for animating the flow through an elbow:
  • Here the “mask” consists of a background-filled Block Arc grouped with a circle (red outline); the object Spins 90 degrees to reveal the Block Arc representing the liquid. The circle assures that the masking object spins about the appropriate center.
  • You may want to add transparency, gradient fills and/or 3d to create more interesting equipment; since the applicable PowerPoint tools are clumsy, prepare to spend some time and effort on this (see my post on piping for tips). Here’s a simple example:

If you want to see more details, use the link below and click on the PowerPoint icon to download a “source” PowerPoint file containing these animations:

Powerpointy Blog – Animating Processes

See this page for more on downloading files.

If you have questions, praise or complaints, please add a comment below. Liking or following this blog might be a good idea.

 

Animation: Liquids – Filling, Bubbling, etc.

pouring

This post is about animations involving fluids and glass containers: filling, leaking, bubbling, reacting, etc. These animations can demonstrate gains, losses and processes.

Fluids change shape and PowerPoint is not very helpful in “morphing” shapes, so there are limits to this kind of animation. Keep it simple.

Drawing the Vessels

I used simple 2d shapes and heavy outlines to draw a set of vessels. A glass-like appearance is provided by a transparent fill and a couple of highlights. Since the vessels are patterned after labware, I added graduation marks. Here’s how the beaker is drawn:

ves1

  • The basic shape is a Round Same Side Corner Rectangle, converted to a Freeform and edited by points to create the rim. You can also use the PowerPoint 2010 Merge Shapes/Union tool to combine the rectangle with an inverted Trapezoid. The outline is 6 pts.
  • The graduation marks are Lines with Format Shape/Line Style/Cap type set to Round.
  • The highlight shapes are point-edited rectangles. The right highlight is a copy of the left one, flipped and narrowed slightly.
  • The beaker fill is a light blue, about 70% transparent.
  • The highlight fill is white, about 60% transparent.

To show contents in the beaker, create a filled round-corner rectangle behind/in Back of the beaker:

ves2

The color of the contents is affected by the semi-transparent fill of the beaker. The second example has no blue fill. You can experiment to get the effect you like but note that any background may affect the result.

Here is some additional glassware made the same way:

ves3

Filling

Filling one of the vessels is pretty easy: just create a “contents object” behind the vessel object and add Entrance/Wipe from Bottom animation:

In PowerPoint 2007, the Microsoft geniuses changed the Wipe effect so that it has a “soft” or blurred edge. And there is no option to select the “hard” edged version. Thanks a lot.

For more on this and some work-arounds, see this post.

To add a filling stream, create an elongated, narrow rounded rectangle reaching from a point off the top of the slide to the bottom of the beaker:

fill1

Add Entry/Stretch/From Top animation and Exit/Collapse/To Bottom to the “stream.” Set the timing so that the entry precedes the fill animation and the exit is just before the end of the fill. I set the duration of these effects to 0.2 sec (slowing down the animations makes the liquid appear more viscous):

fill2

Here’s what this animation looks like:

Here’s a version with a stream of “drops:”

The “drop stream” is a circle with a Fly In/From top animation, Repeated five times. The content object of the beaker is split into two parts; the lower rounded rectangle is static and the upper part has a Wipe/From Bottom animation. The Wipe animation starts when the first drop arrives; here’s the animation pane:

fill3

 Pouring

Obviously, it would be nice to pour the liquid from a vessel. Here’s the animation:

This one stretches the PowerPoint capabilities and uses a trick that, unfortunately, doesn’t always work. We want to lower the level of the liquid in the tube while the tube rotates. Here’s how it’s done:

  • Create a masking object with a tube-shaped hole. You can use PowerPoint 2010 Merge Shapes tools or draw it by hand (a Freeform). Since PowerPoint doesn’t support true “holes”, the shape is drawn this way:

fill4

  • Select Slide Background Fill for the masking object. More about this later.
  • Rotate the mask counterclockwise to the starting position for the pour.
  • Create a Rectangle with the contents color fill and position it behind the mask, aligning its corner with the lower lip of the tube-shaped opening. Here’s what it should look like (I’ll do fine adjustments later):

fill5

  • Now, create a circle, center it on the lower lip of the tube opening and enlarge it so that it encompasses the mask object. Group the circle with the mask object (not the contents object). If you’ve followed this blog, you will recognize this technique for establishing the center for a rotation:

fill6

  • Now to test the setup. Apply a clockwise Spin effect to the mask/circle object so that the tube-shaped opening ends up in a horizontal position. Here’s what this should look like:
  • Adjust the sizes of the mask and the circle so that the unwanted portion of the contents (blue) rectangle remain hidden during the rotation. Don’t change the opening.
  • Now, align the original tube shape in front of the tube opening in the mask. Group with the mask/circle object and remove the outline from the mask and circle. Reapply the animation (Spin).
  • Finally, add a stream similar to the one above – an elongated rounded rectangle reaching past the bottom of the slide with a quick Wipe from Top and a Disappear at the end of the Spin.

The problem with this approach is that it uses a slide background fill. Apparently, the team that added animation to PowerPoint were unaware of (or chose to ignore) other existing features. In particular, the background fill of an object does not actually track the slide background when the object is animated. This is not a problem for a uniform background, but makes this “masking” technique fail for a gradient (for example) background:

You may experience other problems with the background-filled “mask” depending on your graphics configuration or when doing video conversions.

Adding the beaker fill animation completes the effect:

Here’s a drop stream from an eyedropper into the beaker:

Each drop is a circle; the animation is Enter/Zoom, followed by a motion path and a Disappear. The motion path has Smooth Start checked but not Smooth End. The “drop” is duplicated to duplicate the animation. Here’s the animation pane:fill7

The levels in the eyedropper and in the beaker don’t change – only a small amount of liquid is added.

Leaking

Here’s an animation from my post on kinetic typography (animated text):

  • The “container” is the text, outline only, and the “contents” is a copy of the text, fill only, aligned with the original.
  • The text has been tightly spaced so that the characters overlap.
  • The emptying action is a Wipe from Top exit applied to the text object with the fill only.
  • The drop stream is similar to the earlier examples.

Reactions

To evoke activity or change, you can make the liquid react; here’s a couple of examples of bubbling:

  • The bubbles are circles with a lighter version of the contents fill color, about 40% transparent.
  • The bubbles are behind the container group but in front of the contents object.
  • The bubbles appear with a Zoom In animation, followed by a motion path and an exit effect. The animations are overlapped.
  • In the beaker, the motion is from the bottom, straight up to the contents surface. The exit is a Fade.
  • For the flask, the bubble path follows the walls and continues above the surface. The exit is a Dissolve Out.

Another way to show a reaction is to use a color change:

  • The color change is made by a second content object placed between the original and the container. A Dissolve In animation is used in the first example and Fade In in the second.
  • The second example uses the eyedropper and a drop stream to “cause” the color change.

If you are bubbling over with enthusiasm for these effects, use the link below and click on the PowerPoint icon to download a “source” PowerPoint file containing these animations:

Powerpointy blog – liquids

See this page for more on downloading files.

You may also be interested in my post on flows and the one on animating process flows.

If you have questions, praise or complaints, please add a comment below. Liking or following this blog might be a good idea.

 


Follow powerpointy on WordPress.com